Vitocal 300-G Pro

Vitocal 300-G Pro

Large heat pump

Brine-water heat pump with water/water operation capability with intermediate brine circuit.

Rated heat output: 84.9 - 283.0 kW
Use of groundwater with an intermediate circuit
Efficient use of space
For Businesses and Local Government Premises

Environmentally Responsible Heat Pumps – Find out more about the different options and benefits!

Find out more now

Rated Heating Power for Brine/Water Handling

84,9 - 222,2 kW

Rated heating power for water/water operation

107.2 - 283.0 kW

Efficient use of space

The entrance to the installation site should be only 850 mm wide

Use of groundwater with an intermediate circuit

Water/water application with intermediate brine circuit

Pre-assembled electrical equipment

Provides fast installation

Proven technology

Provides reliable functionality

Brine/Water Heat Pump

Single- and two-stage

Low operating costs due to high performance factors

COP (efficiency factor) according to EN 14511: up to 4.6 (B0/W35) and 5.8 (W10/W35)

Maximum Flow Temperature

60°C (5°C brine) for all sizes

Low noise and vibration

Thanks to the sound-optimal design of the device

Maximum efficiency at every work point

Thanks to the innovative refrigerant cycle diagnostics system with electronic expansion valve

Easy-to-use Vitotronic control unit

With plain text and graphic display

Ready-to-use connection

For fail-safe primary and secondary pumps

Electronic soft start system

To reduce inrush current and reduce power consumption from the mains

Overall sound power level

57 to 69 dB(A) at rated heating power (B0/W35)

Series with Vitotronic based on PLC

For targeted integration into a building management system (BMS)

With five power sizes, the Vitocal 300-G Pro large brine/water heat pump reliably meets most requirements in residential and commercial applications.

Vitocal 300-G Pro - Salt-Water Heat Pumps for Large Residential and Commercial Buildings

The Vitocal 300-G Pro heat pumps with a capacity of up to 222.2 kilowatts are mass-produced. The Pro Series has all the features of the highly efficient Vitocal 300-G Series, with five power sizes to reliably meet most residential and commercial building requirements. These instruments are standardized, allowing for fast and comprehensive system design as well as transparent costing parameters. Higher performance can be achieved by combining up to five Vitocal 300-G Pros into a cascade.

Sealed design with new scrolling technology takes up little space. With a width of only 850 millimeters, with removable body panels and a gap in the lower part that allows the device to be transported on a pallet, it is very easy to manoeuvre.

The use of a water/water system with an intermediate brine circuit provides a reliable solution for the direct use of groundwater. An intermediate heat exchanger protects the standard unit from contamination and reduces the amount of maintenance work on the heat pump.

The electrical equipment is already integrated into the heat pump housing. Factory-installed contactors for fail-safe primary and secondary pumps, as well as compressor protection, reduce installation effort and allow for quick installation of the heat pump.

The management philosophy was taken from the Vitocal series for detached and semi-detached houses. Here, too, the Refrigerant Cycle Diagnostic (RCD) system continuously checks the efficiency and ensures reliable operation at every operating point thanks to its interaction with the Electronic Expansion Valve (EEV) and extensive sensor technology.

Easy-to-operate Vitotronic control unit with text and graphic display

The Vitotronic 200 regulates up to three heating circuits and, thanks to the free cooling function, ensures a pleasant indoor atmosphere on hot summer days. A wide range of system monitoring and optimization settings can be adjusted from anywhere, via the Internet or smartphone, using the Vitocom 300 communication module, which is offered as an option.

Series with Vitotronic based on PLC

All models are additionally equipped with a programmable logic controller (PLC). Data transmission via Modbus/BACnet or LAN, in particular, offers the possibility of even more targeted integration into building management systems (BMS). The PLC-based Vitotronic also allows you to control dry coolers and control up to three heating/cooling circuits.

Vitotronic 200 control unit

Combination with air/brine heat exchanger

In combination with the air/brine heat exchanger, the Vitocal 300-G Pro provides both cooling and the use of air as a heat source. The air/brine heat exchanger is connected to the heat pump via a brine circuit and provides heat recovery at air temperatures down to -5 °C. At temperatures below -5 °C, the second heat generator takes over the heat supply in a dual alternate mode. This allows for flexible system design and a reliable system together with a second heat generator.

For such air/water systems, both Vitocal 300-G Pro and an air/brine heat exchanger designed for this purpose are available. An attractive solution from a single source.

Product details

Rated heat output (kW), according to EN 14511, B0/W35, spread 5 K	Type BW 302.D090 & BWR/BWS 302.DS090: 84.9 kW \| Type BW 302.D110 & BWR/BWS 302.DS110: 108.7 kW \| type BW 302.D140 & BWR/BWS 302.DS140: 135.3 kW \| type BW 302.D180 & BWR/BWS 302.DS180: 174.9 kW \| type BW 302.D230 & BWR/BWS 302.DS230: 222.2 kW
Rated heat output (kW), according to EN 14511, W10/W35, spread 5 K	Type BW 302.D090 & BWR/BWS 302.DS090: 107.2 kW \| Type BW 302.D110 & BWR/BWS 302.DS110: 139.8 kW \| type BW 302.D140 & BWR/BWS 302.DS140: 175.0 kW \| Type BW 302.D180 & BWR/BWS 302.DS180: 227.0 kW \| Type BW 302.D230 & BWR/BWS 302.DS230: 283.0 kW
ε Efficiency Ratio (COP) B0/W35	Type BW 302.D090 & BWR/BWS 302.DS090: 4.55 \| Type BW 302.D110 & BWR/BWS 302.DS110: 4.49 \| Type BW 302.D140 & BWR/BWS 302.DS140: 4.35 \| Type BW 302.D180 & BWR/BWS 302.DS180: 4.49 \| Type BW 302.D230 & BWR/BWS 302.DS230: 4.60
ε Performance Factor (COP) W10/W35	Type BW 302.D090 & BWR/BWS 302.DS090: 5.74 \| Type BW 302.D110 & BWR/BWS 302.DS110: 5.78 \| Type BW 302.D140 & BWR/BWS 302.DS140: 5.74 \| Type BW 302.D180 & BWR/BWS 302.DS180: 5.84 \| Type BW 302.D230 & BWR/BWS 302.DS230: 5.64
Applications	Residential buildings, commercial enterprises, premises of local authorities, modernization projects, new construction
Surgery	Vitotronic 200 control unit with text and graphic display

Downloads