Vitocal 262-A

Vitocal 262-A

DHW heat pump

DHW heat pump for outdoor air and air recirculation mode with an enamelled DHW cylinder with a volume of 300 liters.

Low operating costs
Environmentally friendly refrigerant
Low noise level
Fast heating function

Environmentally Responsible Heat Pumps – Find out more about the different options and benefits!

Find out more now

Hot water heating up to a maximum of 70 °C

Up to 65 °C with heat pump module; up to 70 °C with immersion heater or heat generator

Three versions to meet every need

For mono operation, as well as for upgrading and upgrading existing systems.

Consumption of self-generated photovoltaic energy

Thanks to the preparation for optimized energy consumption, a two-stage function (heat pump and immersion heater) is possible

Installation in rooms with low ceilings

Up to 2 meters

Smart Grid Capabilities

Ready for the future

Dehumidification of basements in existing buildings

In air recirculation mode

Low operating costs

Thanks to the highly efficient refrigerant circuit

Low noise level

Thanks to a special silent mode

Environmentally friendly refrigerant hydrofluoroolefin

Global Warming Potential Index 7 is roughly comparable to the Natural Refrigerant Index

Fast heating function

With immersion heater

Hot water heat pump Vitocal 262-A

Economical and energy-saving use of heat from the indoor air, outside air or exhaust air to heat the hot water supply

The Vitocal 262-A DHW heat pump uses heat from the indoor air, outside air or exhaust air to heat the DHW economically and energy-efficiently.

The Vitocal 262-A DHW heat pump is the ideal addition to your existing heating system. In the new Vitopearlwhite design, the appliance is also suitable for installation near living spaces. The wall-mounted version is particularly compact. Vitocal 262-A provides low-cost and energy-saving DHW heating. To do this, the versatile appliance extracts heat from the outside air as well as from the ambient air and exhaust air in the room.

Typical applications include laundries, bakeries, or server rooms, where large amounts of heat are generated on a regular basis.

Integrated range of solutions for Vitocal 262-A

Benefit from value-added and digital services from AHI-Carrier's integrated range of solutions.

AHI-Carrier Heat

AHI-Carrier Wärme is our heating system rental service - ideal for those who want to enjoy superb heating comfort without having to buy a boiler.

More about AHI-Carrier Heat

ViShare

Smart electricity tariffs for your home. Flexible, environmentally friendly and 100% renewable. The electricity tariffs are set by Energy Market Solutions GmbH (EMS), a contractual partner of the ViShare Energy Community and a subsidiary of the AHI-Carrier Group.

Funding professional

The AHI-Carrier FörderProfi service streamlines and simplifies the entire subsidy process, from application to payment.

Features of Vitocal 262-A

Environmentally Responsible Refrigerant

The new refrigerant circuit sets the standard for efficiency and climate protection. It works with the refrigerant HFO (hydrofluoroolefin) R1234ze, which has a GWP (Global Warming Potential) of 7, i.e. roughly comparable to a natural refrigerant. Conventional refrigerants such as R134a, on the other hand, have a much higher GWP value of over 1400.

With the new generation of refrigerants, the Vitocal 262-A DHW heat pumps already meet the requirements of the European F-Gas Regulation, which will be in force after 2030. This makes them especially promising in operation.

Three versions to meet every need

For mono operation, the heat pump is supplied without an internal indirect heat exchanger (type T2E-ze). Built-in hot water cylinder with a volume of 300 liters. Alternatively, a hybrid version with an integrated indirect heat exchanger (type T2H-ze) can be selected. This is recommended for upgrading and upgrading existing systems.

The intelligent control unit always selects the optimal operating mode – heat pump or heat generator – taking into account energy prices and primary energy coefficients. The Vitocal 262-A preheats water in a built-in 300-liter cylinder. The existing heat generator is only used for reheating if necessary. This ensures maximum convenience of hot water supply at any time.

In the compact wall-mounted design (type T2W-ze), the hot water supply is heated by an adjacent hot water cylinder (with a capacity of 160 to 500 liters).

Dry Immersion Heater

The electric version (type T2E-ze) is equipped with a dry immersion heater. The hybrid version with indirect heat exchanger (type T2H-ze) can be retrofitted with an immersion heater if required.

Video: Where does green energy come from?

Carsten Kuhlmann explains where environmental energy comes from and how different types of heat pumps use it.

KEYMARK Certified

AHI-Carrier Vitocal 262-A is Heat Pump KEYMARK certified.

Find out more

Product details

Hot water heating	DHW heated to a maximum temperature of 70 °C (up to 65 °C with a heat pump module and up to 70 °C with an immersion heater or heat generator)
ε Efficiency (COP)*	Air Recirculation Mode: 4.02 \| Outdoor air mode: 3.43 \| *Complies with EN 16147:2017 for A20/W10-53
Energy efficiency class, DHW heating**	A++ \| **In accordance with Commission Delegated Regulation (EU) No 811/2013 for water heaters
Applications	Detached houses, new construction
Additional features	Prepared for optimised consumption of self-generated photovoltaic energy – two-stage function possible (heat pump and immersion heater)
Product cross-section

Downloads