Vitocal 200-A MB

When it comes to modernization, a heat pump is well-suited to dual-mode operation. In this case, the existing system continues to operate to cover peak loads when temperatures are particularly low. This significantly increases the system’s efficiency.

The Vitocal 200-A monoblock heater not only provides efficient and reliable heat during the winter months, but also operates as quietly as a whisper.

The Vitocal 200-A monoblock heat pump utilizes the latent heat of outdoor air for environmentally responsible and cost-effective heating. It can be used for heating only or for heating and cooling.

These new outdoor units, with their timeless design, are very simple in appearance. These single- or dual-fan units are designed and manufactured in-house. Therefore, they offer excellent performance, excellent finish, and superior product quality.

The Vitocal 200-A monobloc is designed for economical operation. All installed components are matched to each other, ensuring the heat pump achieves a very high level of efficiency during operation. This high efficiency can be expressed in figures: according to EN 14511, the Vitocal 200-A achieves a COP (coefficient of performance) of up to 5.0 at an outside temperature of 7.0°C and a water temperature of 35.0°C. At an outside temperature of 2.0°C and a water temperature of 35.0°C, the COP remains at 4.1.

The acoustic properties of the outdoor units of our monoblock heat pumps comply with Advanced Acoustic Design (AAD) specifications. This involves optimizing the frequency spectrum so that low sounds are shifted to higher frequencies, where they are perceived as less unpleasant and better absorbed by the building material.

Therefore, the Vitocal 200-A is particularly suitable for densely populated areas, such as multi-story buildings. You can also find detailed information on this in our knowledge section on the volume and sound of air-source heat pumps .

The compact, wall-mounted indoor unit, complete with hydraulics and control unit, operates silently and can be installed close to living spaces. The connection lines to the outdoor unit are pre-filled with water. No special certificate of competence (refrigerant certification) is required for installation. The refrigerant circuit is hermetically sealed, eliminating the need for leak testing. Thanks to a large number of pre-assembled components and coordinated accessories, the Vitocal 200-A can be installed very quickly. Detailed information on refrigerant circuits/refrigeration units can also be found in this small brochure .

The Vitotronic control unit allows you to manage your heating system conveniently and intuitively. All the most important information is clearly organized and easy to find. The Vitotronic control unit also supports a web interface. All you need is the Vitoconnect interface (accessory) and the free ViCare app . This allows you to not only control the system from anywhere but also have it serviced remotely by an authorized service provider, ensuring optimal operation. AHI-Carrier ventilation units can also be controlled using the Vitotronic control unit. For detailed information, see the ” Mechanical Ventilation ” section.

• Maximum flow temperature up to 60 °C
• Monoblock indoor unit with high-efficiency circulation pump, 3-way bypass valve and control unit
• Possibility of controlling AHI-Carrier ventilation units
• No need to check for refrigerant leaks thanks to the sealed refrigerant circuit
• No minimum clearances are required between the indoor and outdoor units.
• Energy efficiency class* A++ / A++ | type 201.A04: A++ / A+
  
  *Energy efficiency class according to Commission Delegated Regulation (EU) No 811/2013 for heating, average climate conditions – use at low (35°C) / average (55°C) temperature .

For information on the refrigerant circuit/refrigerant, please refer to the quick start brochure .